Commit f1511cb4 authored by Iker Martín Álvarez's avatar Iker Martín Álvarez
Browse files

Merge branch 'RMA-Distributions' into 'dev'

RMA functionality and refactor of many of the codes

See merge request martini/malleability_benchmark!4
parents 2f81e29c 6633cd95
#!/bin/bash
#This script should only be called by others scripts, do not call it directly
#SBATCH --exclude=c02,c01,c00
#SBATCH -p P1
# !!!!This script should only be called by others scripts, do not call it directly!!!
# Runs a given configuration file with the indicated parameters with the aid of the RMS Slurm.
# Parameter 1 - Base directory of the malleability benchmark
# Parameter 2 - Number of cores in a single machine
# Parameter 3 - Configuration file name for the emulation.
# Parameter 4 - Use Extrae(1) or not(0).
# Parameter 5 - Index to use for the output files. Must be a positive integer.
# Parameter 6 - Amount of executions per file. Must be a positive number.
#====== Do not modify these values =======
codeDir="/Codes/build"
execDir="/Exec"
ResultsDir="/Results"
echo "START TEST"
#$1 == baseDir
#$2 == configFile
#$3 == use_extrae
#$4 == outFileIndex
#$2 == cores
#$3 == configFile
#$4 == use_extrae
#$5 == outFileIndex
#$6 == qty
echo $@
if [ $# -lt 3 ]
if [ $# -lt 4 ]
then
echo "Internal ERROR generalRun.sh - Not enough arguments were given"
exit -1
fi
#READ PARAMETERS AND ENSURE CORRECTNESS
dir=$1
configFile=$2
use_extrae=$3
outFileIndex=$4
cores=$2
configFile=$3
use_extrae=$4
outFileIndex=$5
qty=1
if [ $# -ge 5 ]
then
qty=$6
fi
aux=$(grep "\[resize0\]" -n $configFile | cut -d ":" -f1)
read -r ini fin <<<$(echo $aux)
diff=$(( fin - ini ))
numP=$(head -$fin $configFile | tail -$diff | cut -d ';' -f1 | grep Procs | cut -d '=' -f2)
nodelist=$SLURM_JOB_NODELIST
nodes=$SLURM_JOB_NUM_NODES
if [ -z "$nodelist" ];
then
echo "Internal ERROR in generalRun.sh - Nodelist not provided"
exit -1
fi
if [ -z "$nodes" ];
then
nodes=1
fi
echo "Nodes=$SLURM_JOB_NODELIST"
numP=$(bash $dir$execDir/BashScripts/getNumPNeeded.sh $configFile 0)
initial_nodelist=$(bash $dir$execDir/BashScripts/createInitialNodelist.sh $numP $cores $nodelist)
#EXECUTE RUN
echo "Nodes=$nodelist"
if [ $use_extrae -ne 1 ]
then
mpirun -np $numP $dir$codeDir/a.out $configFile $outFileIndex $SLURM_JOB_NODELIST $SLURM_JOB_NUM_NODES
for ((i=0; i<qty; i++))
do
mpirun -hosts $initial_nodelist -np $numP $dir$codeDir/a.out $configFile $outFileIndex $nodelist $nodes
done
else
srun -n$numP --mpi=pmi2 ./trace.sh $dir$codeDir/a.out $configFile $outFileIndex $SLURM_JOB_NODELIST $SLURM_JOB_NUM_NODES
cp $dir$execDir/Extrae/extrae.xml .
cp $dir$execDir/Extrae/trace.sh .
cp $dir$execDir/Extrae/trace_worker.sh .
for ((i=0; i<qty; i++))
do
#FIXME Extrae not tested keeping in mind the initial nodelist - Could have some errors
srun -n$numP --mpi=pmi2 ./trace.sh $dir$codeDir/a.out $configFile $outFileIndex $nodelist $nodes
done
fi
echo "END TEST"
sed -i 's/application called MPI_Abort(MPI_COMM_WORLD, -100) - process/shrink cleaning/g' slurm-$SLURM_JOB_ID.out
sed -i 's/Abort(-100)/shrink cleaning/g' slurm-$SLURM_JOB_ID.out
#!/bin/bash
# !!!!This script should only be called by others scripts, do not call it directly!!!
# Runs a given configuration file with the indicated parameters.
# Parameter 1 - Base directory of the malleability benchmark
# Parameter 2 - Number of cores in a single machine
# Parameter 3 - Configuration file name for the emulation.
# Parameter 4 - Use Extrae(1) or not(0).
# Parameter 5 - Index to use for the output files. Must be a positive integer.
# Parameter 6 - Amount of executions per file. Must be a positive number.
#====== Do not modify these values =======
codeDir="/Codes/build"
execDir="/Exec"
ResultsDir="/Results"
echo "START TEST"
#$1 == baseDir
#$2 == cores
#$3 == configFile
#$4 == use_extrae
#$5 == outFileIndex
#$6 == qty
echo $@
if [ $# -lt 3 ]
then
echo "Internal ERROR generalRunCostum.sh - Not enough arguments were given"
exit -1
fi
#READ PARAMETERS AND ENSURE CORRECTNESS
dir=$1
cores=$2
configFile=$3
use_extrae=0
outFileIndex=0
qty=1
if [ $# -ge 4 ]
then
use_extrae=$4
fi
if [ $# -ge 5 ]
then
outFileIndex=$5
fi
if [ $# -ge 6 ]
then
qty=$6
fi
numP=$(bash $dir$execDir/BashScripts/getNumPNeeded.sh $configFile 0)
nodelist=$SLURM_JOB_NODELIST
nodes=$SLURM_JOB_NUM_NODES
if [ -z "$nodelist" ];
then
nodelist="localhost"
initial_nodelist="localhost"
else
initial_nodelist=$(bash $dir$execDir/BashScripts/createInitialNodelist.sh $numP $cores $nodelist)
fi
if [ -z "$nodes" ];
then
nodes=1
fi
#EXECUTE RUN
echo "Nodes=$nodelist"
if [ $use_extrae -ne 1 ]
then
for ((i=0; i<qty; i++))
do
mpirun -hosts $initial_nodelist -np $numP $dir$codeDir/a.out $configFile $outFileIndex $nodelist $nodes
done
else
cp $dir$execDir/Extrae/extrae.xml .
cp $dir$execDir/Extrae/trace.sh .
cp $dir$execDir/Extrae/trace_worker.sh .
for ((i=0; i<qty; i++))
do
mpirun -hosts $initial_nodelist -np $numP ./trace.sh $dir$codeDir/a.out $configFile $outFileIndex $nodelist $nodes
done
fi
echo "END TEST"
#!/bin/bash
dir="/home/martini/malleability_benchmark/"
# Creates a directory with all possible and valid combinations of configuration files
# that can be created from a given complex configuration file.
# Parameter 1: Complex configuration file name.
# Parameter 2: Common output name of the output configuration files. It will be appended an index to each of them.
#====== Do not modify these values =======
codeDir="Codes/"
execDir="Exec/"
ResultsDir="Results/"
complex_file=$1
output_name=$2
python3 $dir$execDir/PythonCodes/read_multiple.py $complex_file $output_name
echo "END TEST"
#!/bin/bash
dir="/home/martini/malleability_benchmark"
partition="P1"
exclude="c00,c01,c02"
procs=(2 10 20 40 80 120 160)
cores=20
# Runs in a given current directory all .ini files with the aid of the RMS
# Parameter 1(Optional) - Amount of executions per file. Must be a positive number
# Parameter 2(Optional) - Maximum amount of time in seconds needed by a single execution. Default value is 0, which indicates infinite time. Must be a positive integer.
#====== Do not modify these values =======
codeDir="/Codes/build"
execDir="/Exec"
ResultsDir="/Results"
cores=$(bash $dir$execDir/BashScripts/getCores.sh $partition)
use_extrae=0
qty=1
outFileIndex=$2
if [ $# -ge 1 ]
then
qty=$1
fi
for proc in "${procs[@]}"
limit_time=$((0))
if [ $# -ge 2 ] #Max time per execution in seconds
then
limit_time=$(($2 * $qty / 60 + 1))
fi
files="./*.ini"
internalIndex=$(echo $files | tr -cd ' ' | wc -c)
index=$((0))
for config_file in $files
do
echo "------------------------------------------run np=$proc"
node_qty=$(($proc / $cores))
if [ $node_qty -eq 0 ]
then
node_qty=1
node_qty=$(bash $dir$execDir/BashScripts/getMaxNodesNeeded.sh $config_file $dir $cores)
outFileIndex=$(echo $config_file | sed s/[^0-9]//g)
if [[ $outFileIndex ]]; then
index=$outFileIndex
else
index=$internalIndex
((internalIndex++))
fi
config_file="test$proc"".ini"
for ((i=0; i<qty; i++))
do
#Execute test
sbatch -p $partition --exclude=$exclude -N $node_qty $dir$execDir/generalRun.sh $dir $config_file $use_extrae $outFileIndex
done
#Execute test
echo "Execute job $index with Nodes=$node_qty and config_file=$config_file"
sbatch -p $partition --exclude=$exclude -N $node_qty -t $limit_time $dir$execDir/generalRun.sh $dir $cores $config_file $use_extrae $index $qty
done
echo "End"
dir="/home/martini/malleability_benchmark"
partition="P1"
exclude="c00,c01,c02"
procs=(2 10 20 40 80 120 160)
cores=20
#====== Do not modify these values =======
codeDir="/Codes/build"
execDir="/Exec"
ResultsDir="/Results"
use_extrae=1
#Extrae config
qty=1
outFileIndex=$2
if [ $# -ge 1 ]
then
qty=$1
fi
for proc in "${procs[@]}"
do
echo "------------------------------------------run np=$proc"
node_qty=$(($proc / $cores))
if [ $node_qty -eq 0 ]
then
node_qty=1
fi
config_file="test$proc"".ini"
upper_dir="Proc$proc"
mkdir $upper_dir
cd $upper_dir
for ((i=0; i<qty; i++))
do
# Move data to new directory
lower_dir="Run$i"
mkdir $lower_dir
cd $lower_dir
cp $dir$execDir/Extrae/extrae.xml .
cp $dir$execDir/Extrae/trace.sh .
cp ../../$config_file .
#Execute test
sbatch -p $partition --exclude=$exclude -N $node_qty $dir$execDir/generalRun.sh $dir $config_file $use_extrae $outFileIndex
cd ..
done
cd ..
done
echo "End"
#!/bin/bash
#SBATCH --exclude=c02,c01,c00
#SBATCH -p P1
dir="/home/martini/malleability_benchmark"
codeDir="/Codes/build"
partition="P1"
exclude="c00,c01,c02"
nodelist=$SLURM_JOB_NODELIST
nodes=$SLURM_JOB_NUM_NODES
# Executes a given configuration file with the aid of
# the RMS Slurm.
# Parameter 1: Configuration file name for the emulation.
# Parameter 2(Optional): Index to use for the output files. Must be a positive integer.
# Parameter 3(Optional): Number of repetitions to perform. Must be a positive integer.
# Parameter 4(Optional): Use Extrae(1) or not(0).
# Parameter 5(Optional): Maximum amount of time in seconds needed by a single execution. Default value is 0, which indicates infinite time. Must be a positive integer.
# Parameter 6(Optional): Path where the output files should be saved.
#====== Do not modify these values =======
codeDir="/Codes/build"
execDir="/Exec"
ResultsDir="/Results"
cores=$(bash $dir$execDir/BashScripts/getCores.sh $partition)
if [ $# -lt 1 ]
then
echo "Not enough arguments. Usage:"
echo "singleRun.sh config.ini [outFileIndex] [Qty] [Output path]"
echo "bash singleRun.sh config.ini [outFileIndex] [Qty] [Use extrae] [Output path]"
exit 1
fi
echo "START TEST"
#$1 == configFile
#$2 == outFileIndex
#$3 == Qty of repetitions
#$4 == Output path
#$4 == Use extrae NO(0) YES(1)
#$5 == Max time per execution(s)
#$6 == Output path
configFile=$1
outFileIndex=$2
config_file=$1
outFileIndex=0
qty=1
use_extrae=0
if [ $# -gt 2 ]
if [ $# -ge 2 ]
then
outFileIndex=$2
fi
if [ $# -ge 3 ]
then
qty=$3
if [ $# -gt 3 ]
then
output=$4
fi
fi
if [ $# -ge 4 ]
then
use_extrae=$4
fi
limit_time=$((0))
if [ $# -ge 5 ] #Max time per execution in seconds
then
limit_time=$(($5 * $qty / 60 + 1))
fi
if [ $# -ge 6 ]
then
output=$6
fi
aux=$(grep "\[resize0\]" -n $configFile | cut -d ":" -f1)
read -r ini fin <<<$(echo $aux)
diff=$(( fin - ini ))
numP=$(head -$fin $configFile | tail -$diff | cut -d ';' -f1 | grep Procs | cut -d '=' -f2)
echo "Nodes=$SLURM_JOB_NODELIST"
for ((i=0; i<qty; i++))
do
echo "Iter $i -- numP=$numP"
mpirun -np $numP $dir$codeDir/a.out $configFile $outFileIndex $nodelist $nodes
done
echo "END TEST"
sed -i 's/application called MPI_Abort(MPI_COMM_WORLD, -100) - process/shrink cleaning/g' slurm-$SLURM_JOB_ID.out
#Obtain amount of nodes neeeded
node_qty=$(bash $dir$execDir/BashScripts/getMaxNodesNeeded.sh $config_file $dir $cores)
#Run with the expected amount of nodes
sbatch -p $partition --exclude=$exclude -N $node_qty -t $limit_time $dir$execDir/generalRun.sh $dir $cores $config_file $use_extrae $outFileIndex $qty
if [ $# -gt 3 ]
if ! [ -z "$output" ]
then
mkdir -p $output
echo "Moving data to $output\nMoved files:"
ls R${outFileIndex}_G*
mv R${outFileIndex}_G* $output
if [ "$use_extrae" -eq 1 ]
then
mv a.out.* $output
mv TRACE* $output
mv set-0/ $output
fi
fi
#!/bin/bash
dir="/home/martini/malleability_benchmark"
cores=20
# Executes a given configuration file. This script can be called with Slurm commands to
# choose the desired user configuration.
# Parameter 1: Configuration file name for the emulation.
# Parameter 2(Optional): Index to use for the output files. Must be a positive integer.
# Parameter 3(Optional): Number of repetitions to perform. Must be a positive integer.
# Parameter 4(Optional): Use Extrae(1) or not(0).
# Parameter 5(Optional): Path where the output files should be saved.
#====== Do not modify these values =======
codeDir="/Codes/build"
execDir="/Exec"
ResultsDir="/Results"
if [ $# -lt 1 ]
then
echo "Not enough arguments. Usage:"
echo "singleRunCostum.sh config.ini [outFileIndex] [Qty] [Use Extrae] [Output path]"
exit 1
fi
#$1 == configFile
#$2 == outFileIndex
#$3 == Qty of repetitions
#$4 == Use extrae NO(0) YES(1)
#$5 == Output path
config_file=$1
outFileIndex=0
qty=1
use_extrae=0
if [ $# -ge 2 ]
then
outFileIndex=$2
fi
if [ $# -ge 3 ]
then
qty=$3
fi
if [ $# -ge 4 ]
then
use_extrae=$4
fi
if [ $# -ge 5 ]
then
output=$5
fi
bash $dir$execDir/generalRunCostum.sh $dir $cores $config_file $use_extrae $outFileIndex $qty
if ! [ -z "$output" ]
then
mkdir -p $output
echo "Moving data to $output\nMoved files:"
ls R${outFileIndex}_G*
mv R${outFileIndex}_G* $output
if [ "$use_extrae" -eq 1 ]
then
mv a.out.* $output
mv TRACE* $output
mv set-0/ $output
fi
fi
File added
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment